Cavity Slider CaviLock CL100 ADA Lever Handle

The CL100 ADA Lever is not handed

Lever – ADA Turn / Key

Lever – ADA Turn / Emergency

• Compliant with ADA Standards for Accessible Design
• Easy to use – no tight pinching or twisting of the wrist.
• Matches other hardware in the CL100 range.

The CL100 ADA Lever includes a Euro Profile cylinder with American Schlage C Keyway, specified as either KA (Keyed Alike) or KD (Keyed to Differ). It is most suitable for 1-3/4” thick doors.

Satin Chrome

1-3/8″ (34mm)

Back Set: 2-3/64″ (56mm)

The CL100 ADA Lever handle is easy to grasp with one hand and does not require tight grasping, tight pinching or twisting of the wrist. The opening force required to operate the unit is less than 5lbf (22.2N), which is under the threshold for ADA compliance.

Operable parts of hardware must be mounted 34” (865mm) min. and 48” (1220 mm) max. above the finished floor to meet ADA guidelines.

The clear width of the door opening must be a minimum of 32”.

Always check State and Federal guidelines relating to the specific project.